Search
   Search
Drains
Drain Type 1
Drain Type 2
Drain Type 3
Balloons
Lithotripter
salivascope
Book - NEW

Balloons

Sialo Dilatation Balloon

For use on salivary glands

  • Emphasis is on the balloon’s pushability, in contrast to other
    balloons, where emphasis is on flexibility.
  • Available in high pressure levels, 16 bar.
  • Available in 6 balloon lengths.
  • Maximum comfort for the patient: The presence
    of the drain is barely felt.
  • The balloon is inserted into the instrument channel of the set
    manufactured by:Polydiagnost Germany, Karl Storz Germany, and
    Millennium Devices U.S.A
    .
Cat. No Pressure Total Length Ballon Length
SIA 11022 High Pressure  22 cm 10mm
SIA 12022 High Pressure 22 cm 20 mm
SIA 13022 High Pressure 22 cm 30 mm
SIA 14022 High Pressure  22 cm 40 mm
SIA 15022 High Pressure 22 cm 50mm
SIA 16022 High Pressure 22 cm 60 mm

Instructions for use of
Sialo High pressure Balloon

1. Open the package of High
Pressure Balloon under sterile
conditions.


2. Place the High Pressure Balloon
back through the instrument
channel until you see the internal
end of the balloon.

3. Prepare syringe with sterile
water or saline with a capacity of
3cc.

4. Start to inflate the Balloon with
the syringe and pull back the water
and continue gradually.
Repeat the action until the
blockage is cleared or the kinks
are straight.

5. Pull back out the endoscope
together with the Balloon.

6. Place the Sialo Drain for a
period of 28 days.

WARNING:THE DRAIN MUST
BE TAKEN OUT WITHIN 28 DAYS.
Clinical experience shows average
healing time is 2-3 weeks

 
  Home | Site Map | Contact Us  
created by