Search
   Search
Drains
Drain Type 1
Drain Type 2
Drain Type 3
Balloons
Lithotripter
salivascope
Book - NEW
Drains  >>  Drain Type 2

Drain Type 2

Polymeric Sialo Drain

For use on salivary glands

  • Contain: X-Ray View
  • The external portion is funnel-shaped
    in order to prevent obstruction of the
    salivary ducts during the final stages
    of healing.
  • Removal with almost no damage to the
    salivary ducts.
  • Maximum comfort for the patient: The presence
    of the drain is barely felt.
  • May be left in the salivary duct up to 28 days!!!
  • Specially designed device at the edge of the funnel for suturing.
  • The blunt obturator is made of stainless steel and may be used
    as a dilator.



Cat. No Type Length O.D
SIA 21040 Basket&Flaps 40 mm 1 mm
SIA 22040 Basket&Flaps 40 mm 2 mm
SIA 23040 Basket&Flaps 40 mm 3 mm

Instructions for use of Sialo Drain

1. Open the package of the Sialo
Drain under sterile conditions.

2. Hold the Drain with the
introducer and put the entrance of
the drain into the orifice of the
salivary duct.

3. Hold the duct with a-traumatic
forceps and pull the duct slowly
over the drain.

4. push the Drain gently inside the
duct up to the funnel.

5. Suture with 2/0 thread the Drain
in the 2 holes that are for this
purpose. (The holes, small in size,
surround the head of the funnel).

WARNING: THE DRAIN MUST
BE TAKEN OUT WITHIN 28 DAYS.
Clinical experience shows average
healing time is 2-3 weeks

  Home | Site Map | Contact Us  
created by